Sliding Patio Doors Repair
Patio doors that slide open are an excellent way to take advantage of your outdoor space, but they can be difficult to open and close. This can be due to a variety of issues, such as dirty tracks or improperly aligned rollers.
Start by cleaning and lubricating your rollers. You can also use the adjustment holes on the bottom of the movable panel to adjust the alignment of your rollers.
Dirty or Damaged Track
A sliding door that does not slide properly can be caused by a dirty or damaged track. Over time dirt, grit and even rust can build up making the track unable to slide smoothly. A gentle detergent and brush will suffice. It's best to perform this task frequently to ensure the smooth operation of your door, and to avoid the need for costly repairs down the road.
A leaky door is a frequent issue that requires immediate attention to avoid mold growth, water damage and structural degradation. Most often, the issue is due to damaged weather stripping or misaligned doors. These can be fixed by replacing old weather strips and aligning the door.
Rollers that jump off the track are another frequent issue that can be solved with a few minutes of DIY work. Recruit a friend to help you in this endeavor, as the door can be heavy. Sit inside the house and lean a panel toward you to shift the rollers. When the panel is lifted off the bottom track, it's time to place it on sawhorses to stop it from falling off. Then, loosen each of the roller's screws and then pry them out using the help of a screwdriver. Now, you can get rid of any dirt that has accumulated between the wheel and tracks. You can then clean each wheel using denatured alcohol as well as an rag, and then reposition the wheels and attach them to their tracks.
It is possible to straighten a bent section of track with a mallet made of rubber and a piece of wood. If the bent portion is near hinges or is likely to cause more damage, it's best to seek out an expert.
Misaligned Rollers
If your sliding door is experiencing problems with sliding, it's most likely that the roller wheels have been misaligned. The wheels could be dirty or rusted and their bearings wear down. This friction causes the door to catch and grind when it is opened or closed. It can also cause noises that sound like squeaking.
This is a simple fix. It is not necessary to take off the door to get at the wheels since they are on a bracket that is adjustable. Find the holes for adjustment (usually on the opposite side of the frame) and use a screwdriver to rotate the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise rotation lowers it. Continue adjusting until the door is moving smoothly and quietly when open or closed.
It's important to adjust the wheels before making adjustments to the latch. The latch hooks have to line up with the strike plate (the opening through which the latch locks) in order for the lock to function correctly. If you do not do this, the latch may accidentally open or shut even when you're not in the room.
Sliding patio door are an investment. Making sure they are in good working order will keep your family safe. You can prevent costly repairs by addressing common issues like faulty tracks, rollers and handles. Contact us for more information on patio doors. We can assess your needs for repair of your sliding patio door and help you keep it in good shape. Our professionals can also help with any replacement parts you may need.
Damaged or loosely held door frame
Sliding patio doors make a fantastic addition to any home and provide a stylish and practical alternative to hinged or swing-open doors for patios. Like all hardware items sliding patio doors are prone to develop problems with time. Fortunately, most of these issues are easy to fix with a bit of DIY knowledge.
A gap in the frame is a frequent issue with sliding patio doors. This can be caused by a number reasons, including tracks or rollers that are not aligned properly or a damaged door track or a bent frame. Most of the time the root of the problem can be easily fixed by removal of the door and reconnecting the track or rolling elements. This should be done with extreme care so as not to damage the frame or track.
In certain instances, it may be necessary to replace the entire track. This can be done easily with an universal replacement kit that is available at most major hardware stores. These kits are easy to install and will have your door back to normal in a matter of minutes.
Check your sliding door hardware and frame for signs of wear, like loose screws or bolts. These can often be tightened using a screwdriver or wrench and is a simple and efficient DIY patio door maintenance procedure. It is also crucial to oil the tracks and rollers of your patio door to ensure smooth operation and avoid premature wear.
For many homeowners the patio doors are the main entrance to their backyard and outdoor living space. Therefore, they have to be able to function correctly to maintain the comfort of their home and provide security. If you follow these easy DIY maintenance tips, homeowners can prolong the lifespan of their sliding patio door and save money on repairs or replacements.
Handle is not working properly
Patio doors that slide open are an excellent way to get into your home and access your backyard, but they can be difficult to operate if they are not aligned properly. A damaged handle could cause the door to get stuck or be difficult to open and close. Repairing a damaged handle can be done at home.
In most cases the reason for a loose grip is a result of screws that have slipped out of the backplate. To remedy this problem, simply tighten the two screws on the inside of the handle using the help of a screwdriver. If the handle is still loose it could indicate that the threads have worn away and need to be replaced.
A broken latch might be the culprit. This is more likely to occur if the latch made of plastic, rather than metal. If the latch isn't turning or catching you can try oiling it first to see if it aids. If this does not work, you may have to replace the lock.
If the handle is cracked or broken, it may be difficult to operate. If this happens, you'll need to replace the handle with one that is in line with the style and style of your patio doors.
If your patio doors are old and outdated or brand new, Feldco can help you get them back on the right track. We offer high-quality doors in various sizes and styles that can be installed to fit your home perfectly. Contact us today to find out more about our doors! glass door repair cost are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.
Faulty Weatherstripping
If you're seeing light in windows and doors that are closed or you notice a draft pulsing on the window or door, it's time to replace your weather stripping. These strips create a secure seal that prevents air, pests, and water from entering your home. This helps to keep your heated and conditioned air inside, saving money on energy costs.
It may have lost its positive, bouncy seal due to aging. It is easy to identify this by putting a dollar bill under the seal on the top and bottom of the jamb and the door frame, where they overlap. If the dollar bill slides between the seal and door with ease it is time to replace the weatherstripping.
It's tempting to cut out just the worn area of weather stripping to replace it, but this can cause cracks on both sides of the new piece and may cause problems with the seal in the future. It's more efficient to replace the entire stripping so that you can be confident that your door is sealed once again.
Follow our DIY guide for weather stripping and install the correct material for your sliding patio door, and frame to ensure a secure and lasting seal. This is a great opportunity to save money on your energy bills and also fix your sliding patio door. Don't wait until it's too late. You'll reduce your expenses and enhance the look of your home.